The REA-1O3 controller is used to control the Ariona appliance family according to the purification request of the treated area (IC-induct modules and STM-passive modules with and without fan). The controller controls the intensity of the ionisers depending on the ozone concentration of the supply air. This way the exact threshold level will be matched. (Hygiene limit of 0.05 ppm).

The controller is implemented into an ABS plastic housing for wall mounting. With a transparent cover with gaskets the housing reaches the protection class IP65. The incoming cables are tightened with cable glands.

With different buttons and a display settings can be made and values will be shown. This way setting for the treatment of the supply air or return air can be done to achieve the optimal result no matter whether the modules are installed into production plants, restaurants, offices, conference rooms, department stores, air ports, cinemas or concert halls.

The REA-3O3 controller is used to control the Ariona appliance family according to the purification request of the treated area (IC-induct modules and STM-passive modules with and without fan). The controller controls the intensity of the ionisers depending on the ozone concentration of the supply air as well as of the return air. With the incorporation of the ozone content of the return air the relevant information of the treated area can be implemented. This way the exact threshold level will be matched. (Hygiene limit of 0.05 ppm).

The controller is implemented into an ABS plastic housing for wall mounting. With a transparent cover with gaskets the housing reaches the protection class IP65. The incoming cables are tightened with cable glands.

With different buttons and a display settings can be made and values will be shown. This way setting for the treatment of the supply air or return air can be done to achieve the optimal result no matter whether the modules are installed into production plants, restaurants, offices, conference rooms, department stores, air ports, cinemas or concert halls.

The REM controller is used to control the Ariona appliance family according to the purification request of the treated area (IC-induct modules and STM-passive modules with and without fan). The controller controls the intensity of the ionisers with settable intensity levels within ten different time zones.

The controller is implemented into an ABS plastic housing for wall mounting. With a cover with gaskets the housing reaches the protection class IP65. The incoming cables are tightened with cable glands.

With different buttons and a display settings can be made and values will be shown. This way setting for the treatment of the supply air or return air can be done to achieve the optimal result no matter whether the modules are installed into production plants, restaurants, offices, conference rooms, department stores, airports, cinemas or concert halls.

The ARIONA air cleaning and disinfection appliances allow practice orientated solutions for specific air treatment like cleaning, disinfection, regeneration etc. With the energy of the corona effect nascent oxygen atoms bipolar oxygen ions and oxygen radicals (ozone) are generated.

Activated oxygen contains the regenerating power of nature and cleans the air in your rooms around the clock. The effects are: Disinfection of germs and bacteria, reduction of smells, creation of a natural room climate and sedimentation of fine dust particles.

The ARIONA® air cleaning and disinfection appliances allow practice orientated solutions for specific air treatment like cleaning, disinfection, regeneration etc. With the energy of the corona effect nascent oxygen atoms bipolar oxygen ions and oxygen radicals (ozone) are generated.

Activated oxygen contains the regenerating power of nature and cleans the air in your rooms around the clock. The effects are: Disinfection of germs and bacteria, reduction of smells, creation of a natural room climate and sedimentation of fine dust particles.

The ARIONA® air cleaning and disinfection appliances allow practice orientated solutions for specific air treatment such as cleaning, disinfection, regeneration etc.

With the energy of the corona discharge effect nascent oxygen atoms, bipolar oxygen ions and oxygen radicals (ozone) are generated. Such conditions of oxygen are omnipresent within our nature. Mainly responsible for this is the UV-radiation which charges the air electro-statically and splits small quantities of oxygen molecules into nascent oxigen (O+O).

The Passive Sterilizer is ceiling or wall mounted. It is made from stainless steel. All the STM Models are ready-to-plug-in. According to the needs of any particular application a built-in or remote intensity controller can control them.

The Ariona integrated module is allowing a practically oriented solution of a targeted air purification, disinfection and regeneration.

That module is ideal to process drying air of shoe and cloth dryer and ventilated cupboard etc.

The INTEGRA-Basis module contains three different power levels which have to be controlled by a rotary switch. In addition the appliance has to be secured by a 400mA fuse.

Air treatment, smell neutralization, disinfection

The ARIONA® AIRCAT are portable stand-alone, ready to plug-in units for air treatment and purification, deodorization and disinfection. It is a practical solution for “sick building syndrome” and air polluted with bacteria, germs, odours, dust and gases.

The ARIONA® AIRCAT is made from a top quality stainless steel, polished, designed as a tabletop, or self-standing unit suitable particularly for small to medium sized rooms. An integral controller allows adjusting the purification intensity and an air volume. The air purifiers have easily changeable dust filters and a service elapsed time counter.

The ARIONA® AIRCAT exploits a natural process of air purification by micro-oxidation. How does it work? Vitiated (stale or smelly) air in a room or extracted from it, passes through a dust filter into the unit. Neutral oxygen molecules in the air are electrically charged by the corona discharge effect generated by special ionisation tubes. The air is measurably enriched with positive and negative air-ions with a high energy potential. For treating particularly strongly polluted air.

The preferred application areas:

offices, social areas, hotels, waiting rooms, changing rooms, hospitals wards, medical practices, old people and nursing homes, veterinary consulting-rooms and surgeries, sales areas, supermarkets, laboratories, smoking-rooms. private homes smells neutralization: wet walls, stoves and fires, cellar-smells, pet-smell and odour polluted rooms of all types.

The ARIONA® AIRCAT is also successfully used for smoke-smell removing after a fire.

A lot of people do care about the pollution of the outside air. But it is the indoor air quality which has to be improved urgently. According to analyses of leading environmental organisations the indoor air of living and working buildings are heavily strained with dust, allergens, bacteria and smells. As we spend up to 90% of our time in indoor rooms, that strain will affect our well-being negatively. The consequences are; headache, indisposition, allergies, chronic disease of the respiratory tract and reduction of the personal performance.

Responsible for this is the shortage of the activated oxygen in indoor rooms, since the air is being electrically discharged by the building material and the air distribution system. It creates “passive” oxygen, which does not have the ability of recuperation like the ionised air.